We know that welding Helmets are used as process of welding emits of light in three types:
• Visible light damage your retinas with intense brightness.
• Infrared light (IR) melts everything it falls on.
• The third one is ultraviolet that is invisible.
Infrared Light burns the skin. Welding Helmets covers your face and neck so protect from burning. Helmets protect from damages to the skin due to incident light produced in the result of welding activity.
UV rays harm the skin severely. To keep the eyes safe, welding hoods have special shaded glass to prevent harmful light. Filter glass is categorized according to its effectiveness to stop harmful light. A high standard glass ensures more protection and vice versa. A welder needs to lift his hood to rightly target the arc. Now the problem is that our eyes will be disturbed due to the exposure to very bright light.
So auto adjustable welding hoods work best. They prevent the intense flash of light instantly. That is why it can be seen that the welder works without removing his hood, so the hood protects when the arc flashes. The welding hoods provide excellent safety, although they need a fixed-shade lens, that is either number 9 or 10.
Related: Best Auto Darkening Welding Helmets
Comparison of Top 10 Best Welding Helmet
|Lincoln Viking 3350|
|Check On Amazon|
|Check On Amazon|
|Lincoln Electric 3350|
|Check On Amazon|
|3M Speedglas 9100|
|Check On Amazon|
|Jackson Safety Insight 46131|
|Check On Amazon|
|ESAB Sentinel A50|
|Check On Amazon|
Clear Light Lens
|Miller 281000 Digital Elite Black|
|Check On Amazon|
|Hobart 770890 Inventor|
|Check On Amazon|
|Miller Digital Infinity|
|Check On Amazon|
|Jackson Safety BH3|
|Check On Amazon|
Lincoln Viking 3350
- Weight: 3 pounds
- Dimensions: 12.6 x 10.6 x 10.4 inches
- Batteries: 2 CR5 batteries required. (included)
- Material: Plastic
- Optical Clarity: 1/1/1/1
- Shade Range: 5-13
- Viewing Area: 3.74″ x 3.34″
- Switching Speed: 1/25,000 Sec
- Outside Cover Lens: 4.5 x 5.25
- Controls: Shade, Sensitivity & Delay
- TIG Amp Rating: 2 Amps
- Power Source: CR 2450 Battery + Solar Cell
The Viking 3350 arrangement is Lincoln Electric’s top line auto obscuring hood. Lincoln says it planned these welding head protectors to offer a mix of solace, flexibility and premium optics. Vision through the glass is more or less great on these head protectors, with a 1/1/1/1 optical clearness rating and true tones.
Most of the welders who have purchased the welding hood reflect their satisfaction about the visual quality as the darkness varies between 5-13 points.
The configuration is streamlined to disperse weight across the cap to improve equilibrium and cause it to feel lighter. This auto obscuring head protector has a connector to fit onto a hard cap. The 3350 arrangement comes in beautiful styles going from dashing stripes to robot heads and skull plans.
The 1.2-pound weight isn’t the lightest protective cap available, however the enormous review zone implies more glass and that adds weight. Everything accompanies an expense.
If you’re a beginner then you can also check out our Best Beginner Welding Helmets
- High-quality expert protective cap
- Large seeing region
- Continuous light-detecting: work inside or out
- With gloves, activate granulate mode button
- Hood pack, handkerchief, external focal points
- Inside knobs to change affectability and shade level
- Some clients say the headgear won’t remain tight
- Light can get inside the head protector from behind
- Viewing Area: 98mm x 44mm / 3.86″ x1.73″
- Cartridge Size: 110mm x 90mm x 9mm / 4.33″ x 3.54″ x 0.35″
- Optical Class: 1/1/1/2
- Reaction Time: 0.00004(1/25,000) Seconds
- Dark to Light: 0.1-1 Seconds
- Light State: Shade DIN 4
- Dark State: Shade DIN 5-9/9-13
- DC TIG Amperage Rating: >2 Amps
- Battery Type: Solar Cell + 2X CR2032 installed (Replaceable)
- Item Weight: 1 pounds
- Product Dimensions: 9 x 9 x 12 inches
- Size: 3.86X1.73″(4/5-9/9-13)
The Antra AH6-260 is a passage level welding cap that offers some uncommon highlights for its group. It has variable shade levels from 5-13. Albeit the 17-ounce weight is an or more, it implies the plastic on the hood is excessively meager for modern use.
Getting thumped around and hitting it into things when you’re wearing it will destroy it before long. The dainty material likewise implies that overhead welding isn’t a choice in this head protector, on the grounds that liquid slag can consume.
It has solar charging for the batteries and has been confirmed to auto-obscure and ensure with MIG, TIG, plasma or curve. The channel glass is intended to shield from UV and IR if it’s controlled up.
A few clients have revealed collaborators purchasing these caps to supplant the headgear in their costly protective caps. The AH6-260 uses solar energy alongside the batteries.
Movable postponement and affectability controls are amazing in this value range. One smart plan highlight is a flexible lower limit so when the hood is brought down it sits in a similar detect without fail.
Check it out if you’re looking for best budget welding helmets.
- Variable concealing from 5-13
- Solar accusing of auto shutoff
- Users love the headgear
- Comfortable with glasses
- Response Period of (1/25,000) Seconds
- Thin plastic: No overhead or mechanical use
- Some clients report being streaked mid-weld
Lincoln Viking 3350 is within the premium range of welding helmets. It combines the newest technology, comfort and affordability, making it one among the simplest welding helmets available today.
This helmet is for anyone that’s serious about safety and utility. Additionally, to the quality auto-darkening features, it offers the very best possible optical rating, one among the most important lenses within the industry and optimal comfort. Read on this Lincoln Electric Viking 3350 review for more detail on all its features.
This high-quality welding helmet is meant to face up to tons of abuse. This makes it perfect for both professional welders and DIY enthusiasts. The lens has high sensitivity and it’ll work even with low amp TIG welding.
If you’re working on Mig Welding, then you can also read our Best welding helmets for tig.
- Large viewing area
- High-quality optics
- Great lens sensitivity
- 4C Lens technology
- Good range of shade settings
- Long battery life
- Has good head retention system
- Designed for comfort and optimal fit
- Viking 3350 may be a bit heavier as compared to other helmets. So it’d cause fatigue if used all day.
3M Speedglas 9100
- Item Weight: 1.00 pounds
- Product Dimensions: 11 x 11 x 10 inches; 1 Pounds
- Batteries: 2 Lithium Metal batteries required. (included)
- Large viewing area: 2.8″ x 4.2″
- Side windows: shade 5 filters that widen your peripheral view
- Classification: 1/1/1/2
- Battery Life: 1800 hours
- Selectable shades: 5, 8-13, and shade 3 light state
One exceptionally amazing element of the ADF 9100 XXi is diminished green appearance when seeing your work through the glass. The thought is that characteristic tones make it simpler to see your work and deal with the welding puddle. Protective caps in this value range are for experts, and a few welders have objections about the headgear coming free lovely regularly it’s a minor grievance.
Controlled by lithium batteries, the ADF 9100 has a pounding function button intended to use wearing gloves. With customizable shade from levels 5-13, the catch helps the glass so you can deal with different tasks.
The glass obscures again when you strike a bend to return to work. At the point when you quit welding, the optics help up to conceal 3 obscurity. The 9100XXi choice offers two preset modes that give you a snappy determination for retained arrangements of dimness settings.
The In and out element enact the 3M Speedglas head protector at its latest setting and close off the glass naturally to save batteries. Fumes vents for your breath and side windows are among the expert highlights of this head protector that make it more agreeable to turn out in for quite a while.
- Professional-grade welding cap
- Grab and go auto-on allows welders to work rapidly
- External crushing mode actuation
- Meets ANSI Z87.1-2010 effect standard
- Handy side windows
- Some clients report releasing of the headgear
- Matte finish can be difficult to keep clean
Jackson Safety welding helmets are a standard sight in fabrication shops. Welders preferring other products frequently purchase Jackson hood to find what they want from the best welding helmet. On the other hand, some welders complain about burning off their neck from the uncovered part.
The Vision 46131 bids high-quality vision for its price series. Possessors commonly admire the auto-darkening feature on this hood because of its matchless properties. Many admire the digital darkness regulators, which specify your darkness rate with just a quick look.
- Operators admiring over top class auto dim
- Jackson helmet is a trade preferred
- Substitutable with another Jackson covers
- Some of the clients complain of insufficient neck exposure
ESAB Sentinel A50 is an effort to redefine the normal welding helmet. The innovative “space warrior” appearance truly helps a genuine drive. It’s modernized to permit adjacent work like welding inside of the cars, cupboards and equipment.
The curve is additionally intended to enhance head coverage. The curved lens is meant permanently sight to avoid smashes. Though, numerous owners account that in-close welding can cause in deforming injury to the lens. As a bit that’s not systemized throughout the industry, substitutions are costly.
One point where ESAB appears to possess is with the 5-grade helmet. This design structures a bag shape which resembles with the uppermost of the top like numerous solid helmet use. The 5-point hood permits shifting the mass of the hood in numerous directions for problematic welding circumstances.
Searching Best Welding Helmets for Tig? Read More!
- 8 distinct storage spaces
- Hard hat converter choice
- Very lightweight
- Shape is perfect for welding inside cars
- Bent anterior glass is expensive to exchange
The Miller Digital Elite helmet provides X-mode, which is that the feature that creates it stand out. this is often their name for the technology that detects the electromagnetic field generated when striking an arc.
If you’re often out of position, or in confined spaces, your sensors might not “see” the arc. Or in bright sunlight, your auto-darkening feature might not close up once you aren’t welding. With X-mode, these problems are eliminated, and importantly, you are doing not risk being flashed.
The Digital Elite helmet also weighs but the Viking 3350. Both are light as compared to other helmets on the market, but if you would like the lightest helmet between the 2, that might be the Miller Digital Elite.
- X-mode eliminates bright sun interference and darkens lens albeit arc sensors are obstructed
- The interface is straightforward to read at a look
- Autosense technology to automatically adjust the sensitivity
- Clear Light lens technology for more natural colors
- Need to flip up to vary to grind mode
- Lenses are a proprietary size
Hobart has been providing the best welding helmets to the industry. Products just like the Inventor welding helmet have tons to try to thereupon. The adjustment for the auto-dark function use knobs, which are cooler to use than buttons while someone is with gloves on his hands.
The hood cover, though slightly thin, is made up of polyamide nylon. This stuff provides light weight for its level of safety from accident, fragments and slag etc. The hood provides changes on the uppermost also from the back as well. That’s additional feature that increases the weight, but advances ease and equilibrium.
The Hobart Inventor is a little bit heavier than other hoods in its type. That’s an effect of the big 9.3-inch view window and thus the enlarging “cheater lens” at inner side of the helmet. Though, heaviness actually isn’t an enormous issue since it’s well-proportioned.
Hobart and Jackson are perhaps the most-used automatic welding hoods in professional markets. Comfort is the most important priority.
- Sensitivity & Delay Controls
- Turns on and shuts off automatically
- The interface is straightforward to read at a look
- Low battery indicator
- Users love its great balance & optical clarity
- Headgear offers size and top adjustment
- Slightly heavy at 1.25 pounds
With 13.4 square inches of view window, the Digital Infinity is one among Miller’s topmost welding hoods. You can’t buy a much bigger viewport than this one, supplying you with the power to ascertain clearly once you need to fit into a decent spot and may only see the work on an angle. Miller’s Clear Light Technology offers high-definition correct colour vision through a clarity level of 1/1/1/2.
X Mode removes prompting in bright sunlight. A low current welding work like TIG can influence adjustable shade filters the other way and therefore these filter stays clear while you’re still welding. X mode uses electromagnetic sensors to sense the welding arc instead of by means of light sensors, which removes these prompting problems.
With the InfoTrack timing record program, a help menu and Miller’s 3-year warranty, the Digital Infinity is one among the best helmets available in its price range.
- X-mode stops sunlight prompting
- Huge view window offers you to see work on an angle
- Headgear is comfortable
- LCD screen for adjustments
- Strong Light correct color filter
- This may Slip-ups frontward
One of the primary belongings you notice on this welding helmet is its large viewing window. Its size is 3.8″ x 2.7″. This offers welder clear visibility of your work area and making it easy to find and target out-of-position arc.
The hood is made with the most recent Balder Technology which offers higher level of vision quality. The EN379 (1/1/1/1) level is that the highest possible standard of auto-darkening welding hoods.
The hood’s glass is furthermore wavelength-specific, which allows it getting darker when receives an arc, but will stay disabled if you see the sun or any light-weight bulb.
The welding helmet is designed to provide best protection level. It gives best safety for the whole face and neck. you would possibly only experience some issues when grinding, because it produces more sparks which will re-evaluate your head and choose your back.
The best welding headgear of Jackson Safety BH3 allows 3 hoods modifications so as to supply best ease and protection. Firstly, using the notch holdup, you’ll change the position of the glass from your eyes. So, for instance, if you’ll be wearing glasses, you’ll increase the space so as to scale back discomfort.
The welding hood is nearly 20 ounces by weight, which is ranked lightweight for an auto-darkening welding hood. This is the most significant because it would safe your neck from getting stiffer after long period of continuous work. So, this welding hood adjusts correctly and would not be problematic while putting it on the whole day.
The Jackson Safety BH3 has been tested for various safety levels to ensure safer use. Certified by ANSI Z87.1 Highest Brand 2010 level with CE and DIN Plus.
- Large view window
- Lightweight design
- Comfortable fit
- Highly adjustable.
- No battery required (solar-powered)
- Compatible with a spread of applications
- Meets ANSI/ ISEA standards
- 5-year warranty
- Not any grind mode option
Best Welding Helmet Buying Guide
You’ll find several different options when buying the simplest welding helmets. Below are a number of the foremost important factors to think about when trying to find the simplest welding helmets.
Welding Helmet Viewing Area
The helmet’s viewing area are some things you ought to consider also. The hoods with large view window are nearly around 4″ x 3″ and more.
3.5″ x 1.75″. If you’ll be using it during a limited space, then you need to select a welding hood which has a wider and special view window.
All the glasses of the auto-darkening welding hoods are tested first for inner regulator and are rated according to the quality of vision they offer.
This reflects the clarity of the sight while looking through the lens. Auto controlled darkening lenses are available in almost four categories depending upon the level of clarity they offer. These welding hoods have a visual level of 1/1/1.
While choosing to buying an automatic welding hood, you would like to also consider the number of used arc sensors. These sensors are liable for detecting flashes as you’re employed and can darken the helmet during a fraction of a second so as to stay your eyes protected.
Two arc sensors should be enough. Four sensors are the ideal as they greatly reduce the chance of the helmet failing to respond to the light that flashes.
One needs to keep it in mind that that he will be need to wear his welding hood for a long duration of time so he needs to opt on a hood with which he is comfortable to wear.
The welding hoods which are heavy put a pressure over the neck and cause pain although they do not hurt. You may get hurt by the welding helmet even when it is not too heavy, while we put it on for the first time.
Comfort must be among the top most priorities when selecting a good welding hood. When it involves this, the lightweight and padded helmet could be a far better choice.
They do not hurt your neck even if you keep putting on for a long duration of time. It needs to make it sure that your selected welding helmet is fitting best with your skull size.
Now the welding hoods are available with a variety of power sources. Some work with lithium batteries, while others with solar energy. There also are people who use both.
Most of the time welding helmets with both lithium and solar powers sources are the best welding helmets among all. Furthermore, if one among the facility sources runs out, you’ll use the opposite. If one chooses a battery-powered welding hood, he should confirm first either these are replaceable or not.
The welding hoods with replaceable batteries option are more compatible. It is because we just need to attach charged batteries and start using it. But one must make it sure to hold a group of alternative power source batteries with him.
One it comes to solar powered welding hood, one needs not to replace its batteries again and again. This feature is what you’ll usually get if you select a helmet with auto-off features.
A wide range of auto- darkening welding helmets is available in the market with variety in their shades options. When your welding hood will be having more shades option so it would be working best in different requirement level of welding.
When the welding works requires to be often changing and adjustment of the settings and processes of your hood, then he needs to get a welding hood that has a wide range of options to adjust the shades. The level somewhat between 9-13 is considered to be normal.
However, if a welder is welding at low electric current, so it is difficult to target the arc clearly, the shade level should be adjusted between 6-13.
Sensitivity regulator is one of the most important features to consider when we need to purchase a welding hood.
Fortuitously, all most all of the automatic darkening welding hoods available in the market can be adjusted at a minimum brightness level that will activate the obscuring. This function is useful when a welder is welding at a very low electric current and he needs like to enhance the sensitivity.
It’s one of the important features when a welder is working alongside some other welders and he is exposed to several arcs.
Lens Response Time
The response time is how briskly the lens from light turns to dark when the arc is initiated. Lenses respond at very fast speed. The professionally used lenses are graded at rate of 1/20,000 in a second. If you weld often, it becomes hard to carry on with a lens which has fast response time.
For your own safety, always select a welding helmet which meet the prescribed standards of ANSI. Currently, the safe set for welding hoods is ANSI Z87.
You’ll now find different sorts of welding helmets within the market. Previously welders had very few colors available but now they can choose from a great variety of colors and graphical prints.
The price of the welding hood differs a lot but it ranges from $40 to $800!
On account of excellent arc sensors helmet, viewing area, optical quality, safety level, price customization options, response time and sensitivity Lincon Viking 3350 is the best choice which is mention on the top of our list. Its very cost effective and an amazing choice for professional welders.
It has been the top most priority for the buyers. It offers all the features which a buyer can expect form a reliable best quality welding helmet.
Brayden has been a welding enthusiast and expert for the past 7 years. He always loves to help others by guiding them as a welder expert. That’s the reason he found writing on a site “welderexpert.com” to guide other new and beginner welders.